Call:886-2-2792-2819

UD102 4K passive 3D processor

Quick Overview

UD102 is designed for 4k UHD projector edge blending as well as passive 3D format conversion, decoding 3D signal into RH/LH eye frames for passive 3D display. It can also convert all kinds of 3D formats (including Line by Line and dual cameras 3D) into Side by Side, Top/Bottom or frame sequential output for active 3D. Through advanced image warping function, UD102 can do precise image stacking for RH & LH eye frame projectors to get perfect 3D effect. 

The input source can be from PC, Blue Ray DVD, game console or medical endoscope.

 

 

UD102 supports Side by Side, Top/Bottom, Frame packed, Line interleaved and Frame sequential 3D input signals and can decode 3D input signals into RH/LH output format for passive 3D display. It is embedded with advanced geometry alignment function to stack RH/LH eye frame images into accurate position to get the best video quality. 

For active 3D application, UD102 can convert 3D input signals into Side by Side, Top/Bottom or Frame sequential output format for active 3D projector. 

It is designed with two  processing modules. Each module is integrated with 3x HDMI2.0 and one DP1.4 input ports and two HDMI2.0 output ports. It supports up to 4k/2k 444 input  and output (max. 600Mhz). Dual camera discrete 3D format can be supported as well. It is a most universal and flexible 3D processor in the world.

Using UD102, users can replace high end projector with low-cost projector without lens shift, warp and 3D function. It provides easy configuration, low entry barrier, cost effective, reliable and flexible solution.

  • Each UD102 consists of:
    • Input: 6x HDMI 2.0b, 2x DP1.4, input can be seamless switching within processing module.
    • Output: 2x HDMI 2.0
    • Loop output: 2x HDMI 2.0b for audio, monitoring and daisy chain connection.
  • HDCP compliance: Input: HDMI: HDCP V2.2/V1.4, DP: HDCP: V1.3, Output: HDCP V2.0/V1.4.
  • input resolution: DisplayPort: 7680*4320 @30Hz, HDMI: 7680*2160 @30Hz, 7680*1200 @60Hz, 4096*2400 @50Hz, 4096*2160 @60Hz.
  • Input supports progressive and interlaced RGB/YUV signal, 4:4:4 Chroma sampling, up to 30 Color bits.
  • Support non-VESA standard input timings for easy connection with various signal sources.
  • 16 selectable Outputs: HDMI 2.0 up to 4096*2160 @60Hz, progressive 4:4:4 RGB.
  • 2 frames system latency: 33ms (@V=60Hz)
  • Warp engine for geometry alignment up to 120*68 control points.
  • Maximum geometry adjustment up to 1200 pixels in both H&V directions for each corner.
  • Support W shape Corner Wall adjustment in H&V directions up to +_1200 pixels.
  • Support Linearity Grid Line adjustment for quick H&V line position alignment. It is good for the line gap adjustment on curved screen display.
  • Edge blending at 4 edges up to H=1920 pixels, V=1200 pixels with independent RGB gamma correction.
  • 9 regions black level uplift to compensate light leakage from projector optical system.
  • Edge Mask following the result of geometry alignment up to 500 pixels.
  • Edge Mask with 8 control points up to 900 pixels (1800 pixels when output resolution is 4k/2k) at each control point in H&V directions.
  • Embedded video wall function for image split, cropping, edge blending overlap pixel setting and aspect ratio adjustment.
  • Selectable geometry alignment grid size from 8-120 pixels in H&V direction. Default is 32*32 pixels.
  • Selectable grid pattern color with optional transparency to allow user to apply external test pattern.
  • Flexible aspect ratio adjustment in each edge up to +_ 1800 pixels position shift.
  • OSD menu location is adjustable.
  • 10-bit processor, 3:2/2:2 cadence, low angle smooth algorithm, high quality scaling engine.
  • 3D motion adaptive de-interlace.
  • Support 3D input signals: Side by Side, Top/Bottom, Frame packed, Line interleaved and Frame sequential.
  • Passive 3D: Decode 3D input signal into RH/LH eye frame output for passive 3D display.
  • 3D format conversion: Convert 3D input signals into Side by Side, Top/Bottom and frame sequential output signal for passive 3D and active 3D displays.
  • Frame lock function to get perfect synchronized outputs in multi-unit application.
  • Frame rate conversion and 50Hz in/out function to eliminate image frame drop or repeat.
  • Support xvYCC & 8/10/12-bit deep color processing.
  • Automatically support HDR 10 input signal processing with SDR full color RGB 4:4:4 output.
  • Individual color and white balance adjustment in each processing channel.
  • 90/180/270 rotation, flip, cropping, scaling & color adjustment up to 4k/2k 60Hz input signal. User can do more rotation angle fine-tune through geometry alignment.
  • PIP/POP function with PIP image size from 320*180 up to 1920*1200 resolution with flexible position and adjustable aspect ratio. 2/3/4 split view POP is integrated within each channel.
  • Selectable and programmable EDID in the range: H=1024-4080, V=720-3840.
  • User can save up to 10 settings that can be recalled by front panel keypads, remote controller, RS232, USB or network.
  • ESD Protection: ±15kV (Air-gap discharge), ±8kV (Contact discharge)
  • Working environment: 40C, 10-90% RH
  • Control: keypads, IR, RS232, USB, Ethernet
  • System settings can be stored and backup in PC.
  • CE/FCC/RoHS Certified 
  • Power supply: DC 12V 2A-5A
  • 2 Year Warranty, paid extension available up to 5 years.
  • Power consumption: 12V/2.1A, 25.2W
  • Dimensions (Body only): UD102: 440mm*190mm*58mm, Weight: 2.5kg